Non-Distributed System

This section is a guide to getting started with ServiceOptimizer. It describes an example system and gives details of how to configure this system. See schematic diagram Figure 1, opposite:

A description of the tables and parameters that must be configured is given the page links below.

The minimum configuration of the example system is given here.

sp400_components

Column	System Monitor	API Agent	Gantt Router	FRU Process 1	FRU Process 2	FRU Process 3
component_no	1	2	3	4	5	6
component_id	'monitor'	'apia'	'grouter'	'fru1'	'fru2'	'fru3'
component_type	1	2	3	4	4	4
parameters
host_machine
fru_no				317	318	319
active	1	1	1	1	1	1
max_restarts	0	3	3	3	3	3
trace_mask_no	1	1	1	1	1	1
max_log_file_size	10	10	10	10	10	10

sp401_componenet_hierarchy

Column	API Agent / FRU1	Gantt Router / FRU1	API Agent / FRU2	Gantt Router / FRU2	API Agent / FRU3	Gantt Router / FRU3
component_no	2	3	2	3	2	3
is_client_of	4	4	5	5	6	6

sp406_monitors

Columns	Entry for System Monitor
component_no	1
heartbeat_port
heartbeat_address
monitor_state	1
pid
pci_port
pci_address

sp409_component_ports

Column	API Agent C API Port	API Agent SOAP Port	Gantt Router Port
component_no	2	2	3
port_type	1	3	1
port_no	10021	10022	10028
port_address
listener_count	8	8	8

Figure 1: Example Non-Distributed ServiceOptimizer Instance

Distributed System

NOTE: In this example, every computer has been configured identically, with a ServiceOptimizer SPHOME installation and Travel Matrix on every computer – even though for example the Travel Matrix is not used on host poseidon and the API Agent is not run on host artemis. SPHOME and/or Travel Matrix could be on a shared filesystem if required.

The following alterations need to be made to the above settings:

sp400_components (monitors)

Rename component_id for component_no 1 and add new entries for slave system monitors:

Column	Master System Monitor	Slave System Monitor #1	Slave System Monitor #2
component_no	1	7	8
component_id	'mastermon'	'slavemon1'	'slavemon2'
component_type	1	1	1
parameters
host_machine
fru_no
active	1	1	1
max_restarts	0	0	0
trace_mask_no	1	1	1
max_log_file_size	10	10	10

sp406_monitors

Add new entries for slave system monitors:

Columns	Master System Monitor	Slave System Monitor #1	Slave System Monitor #2
component_no	1	7	8
heartbeat_port
heartbeat_address
monitor_state	1	1	1
pid
pci_port
pci_address

sp416_host_machines

Rename existing single entry for host "poseidon" and add new entries for "heracles" and "artemis".

Columns	Poseidon	Heracles	Artemis
host_machine	'poseidon'	'heracles'	'artemis'
description
monitor_no	1	7	8
archive_location

sp083_system_parameters

Update the entry for value "mon_controlling_host" to specify which sp416_host_machine entry is the designated master.

Column
name	'mon_controlling_host'
value	'poseidon'

sp400_components (components)

Map the components to the hosts on which they are to run:

Column	API Agent	Gantt Router	FRU Process 1	FRU Process 2	FRU Process 3
component_no	2	3	4	5	6
component_id	'apia'	'grouter'	'fru1'	'fru2'	'fru3'
component_type	2	3	4	4	4
parameters
host_machine	'poseidon'	'poseidon'	'heracles'	'heracles'	'artemis'
fru_no			317	318	319
active	1	1	1	1	1
max_restarts	3	3	3	3	3
trace_mask_no	1	1	1	1	1
max_log_file_size	10	10	10	10	10

sp406_monitors

Entries for the system monitors are unchanged:

Column	Master Sysmon	Slave Sysmon #1	Slave Sysmon #2
component_no	1	7	8
component_id	'mastermon'	'slavemon1'	'slavemon2'
component_type	1	1	1
parameters
host_machine
fru_no
active	1	1	1
max_restarts	0	0	0
trace_mask_no	1	1	1
max_log_file_size	10	10	10

Figure 2: Example Distributed ServiceOptimizer Instance

..

Travel Matrix Configuration

Browser not supported